5" RADIUS ARM KIT W/2.25 DLSS 2019-21 RAM 2500 4WD. - K3180DL
Secure Checkout
Shop by Categories
Secure Checkout
Specifications:
| California Proposition 65 | WARNING: Cancer & Reproductive Harm and image |
| Title | Fabtech 5" RADIUS ARM KIT W/2.25 DLSS 2019-21 RAM 2500 4WD |
| Description_ASC | TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R18 WHEEL - 18X9 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; 20. DOES NOT FIT STANDARD CAB MODELS.; 42. WILL NOT FIT GAS MOTORS.; 130. WILL NOT FIT FACTORY AIR SUSPENSION.; 208. DOES NOT FIT POWER WAGON MODELS. |
| Description_DEF | Suspension Lift Kit |
| Description_DES | 5" RADIUS ARM KIT W/2.25 DLSS 2019-21 RAM 2500 4WD |
| Description_EXT | 5" RADIUS ARM KIT W/2.25 DLSS 2019-21 RAM 2500 4WD. |
| Description_INV | Fabtech-5" RADIUS ARM KIT W/ |
| Description_MKT | Improving on the Ram suspension design, Fabtech offers their trademark Radius Arms in a complete lift kit system. These exclusive tubular Radius Arms have recognizable dimple die side plates for superior strength and a signature of quality. The rugged Arms provide increased caster for use with oversized tires and lifted suspension heights. The factory front Ram coil spring has a noticeable bow to it with a very high spring rate for the weight rating of the vehicle. This creates a harsh ride with a nervous feel from the suspension. To correct this, Fabtech uses a straight vertical coil design. In order to utilize a straight coil, the lower spring seat mount must be modified via a Fabtech patented angular spring mount that attaches to the stock seat. This eliminates the bow to the spring and allows for a lower rate with a straight coil for a supple ride without sacrificing load carrying capacity. A Fabtech exclusive. For the rear, this lift kit has the perfect balance between ride quality and retaining the factory carrying capacity. By utilizing a dual rate spring design, it provides a good highway ride in the first stage of compression and then the second stage handles heavy loads. Heavy duty 1/4in thick steel front and rear Track Bar drop brackets center the axles under the vehicle with the new ride height. A Fabtech innovation with this Ram lift kit is the heavy duty steel front bump extensions. They retain the stock bump stop cushions for progressive damping and will not allow the suspension to over travel. This is a superior feature compared to replacement long length urethane bump stops as they can push out under harsh conditions. FEATURES: Fabtech's trademark Radius Arms with recognizable dimple die side plates providing additional strength and increased caster. Front straight Coil Springs with Fabtech's patented angled mounts for smooth ride. Heavy duty Track Bar drop brackets center the axles under vehicle for proper tracking. Dual rate rear coil spr |
| Description_SHO | 5" RADIUS ARM KIT W/ |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2019 | Ram | 2500 | Big Horn | |
| 2020 | Ram | 2500 | Big Horn | |
| 2021 | Ram | 2500 | Big Horn | |
| 2019 | Ram | 2500 | Laramie | |
| 2020 | Ram | 2500 | Laramie | |
| 2021 | Ram | 2500 | Laramie | |
| 2019 | Ram | 2500 | Laramie Limited | |
| 2020 | Ram | 2500 | Laramie Limited | |
| 2019 | Ram | 2500 | Laramie Longhorn | |
| 2020 | Ram | 2500 | Laramie Longhorn | |
| 2021 | Ram | 2500 | Laramie Longhorn | |
| 2019 | Ram | 2500 | Limited | |
| 2020 | Ram | 2500 | Limited | |
| 2021 | Ram | 2500 | Limited | |
| 2019 | Ram | 2500 | Lone Star | |
| 2020 | Ram | 2500 | Lone Star | |
| 2021 | Ram | 2500 | Lone Star | |
| 2019 | Ram | 2500 | SLT | |
| 2019 | Ram | 2500 | Sport | |
| 2019 | Ram | 2500 | Tradesman | |
| 2020 | Ram | 2500 | Tradesman | |
| 2021 | Ram | 2500 | Tradesman |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.