Flowmaster American Thunder Cat-back Exhaust System - 17162
Secure Checkout
Shop by Categories
Secure Checkout
Specifications:
| Description_ABR | SYS 92-95 CH |
| Description_SHO | SYS 92-95 CHEV/GMC B |
| Description_INV | 9295 CHEVGMC BLZRJMY 57L A T |
| Description_ASC | Fits 1992-1995 Chevrolet Blazer and GMC Jimmy with 5.7L engine, fits 2/4 wheel drive, for early 1995 fit check factory catalytic converter. |
| Description_DES | Flowmaster American Thunder Cat-back Exhaust System |
| Description_EXT | Fits 1992-1995 Chevrolet Blazer, GMC Jimmy with 5.7L engine. - Moderate sound |
| Description_MKT | This Flowmaster American Thunder® cat-back exhaust system is custom designed for 1992-1995 Chevrolet Blazer and GMC Jimmy with 5.7L engine and is perfect for the person looking for a mild to moderate sound level inside and moderate tone outside, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a flanged 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a Super 50 Series™ muffler for a deep powerful tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip exiting behind the right rear wheel and uses the factory hanger locations for an easy installation. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. |
| Description_FAB | Includes Hangers and Hardware for an Easy Installation Mandrel-bent 16-gauge Aluminized Steel Tubing Dyno Tuned for Maximum Performance Super 50 Series Performance Muffler Uses the Factory Hanger Locations Moderate Exterior Exhaust Tone Easy Installation |
| Brand | Flowmaster |
| California Proposition 65 | No |
| CARB (California) Compliant | Yes |
| 2874 | 0 |
| Category | Exhaust |
| Clamping Type | U-Bolt |
| 1882 | Yes |
| Emission Code | 5 |
| Exhaust Series | American Thunder |
| 11205 | Silver |
| 9874 | Welded |
| 9876 | Angle |
| Exhaust Tip Diameter | 2.50 |
| 9877 | Slash Cut |
| 1163 | Polished |
| 9881 | No |
| Exhaust Tip Length | 15.20 |
| 1164 | 304 Stainless Steel |
| Exhaust Tip Quantity | Sold Separately |
| 1161 | 0 |
| 9878 | No |
| 10980 | Round |
| 9875 | Single Wall |
| 9870 | Single Out Side |
| 200 | Aluminized |
| 353 | No |
| 3390 | Performance |
| 4364 | Yes |
| Heat Shield Included | No |
| Inlet Diameter | 3.00 |
| 596 | Flanged |
| 92 | Yes |
| 9884 | 5.00 |
| 1892 | 17.00 |
| 4372 | Aluminized Steel |
| 4373 | Oval |
| 9882 | Black High-Temperature Paint Finish |
| 4367 | Yes |
| 4368 | No |
| Muffler Included | Yes |
| 9962 | Welded Flange |
| 4365 | 3.00 |
| 4366 | 3.13 |
| 9963 | Slip-Fit |
| 4375 | 1 |
| Muffler Part Number | 53058 |
| 4374 | 1 |
| Muffler Series | Super 50 Series |
| 1174 | Chambered |
| part type | Exhaust System |
| 3530 | Aluminized Steel |
| Product Type | Exhaust System |
| Sound Level | Moderate |
| 4377 | No |
| Sub Category | Exhaust and Tail Pipes |
| 4369 | 3.00 |
| 4376 | 1 |
| Tail Pipe Quantity | Single |
| 4370 | No |
| 9871 | 3.00 |
| 26 | Cat-Back |
| 6014 | No |
| 2126 | Not Applicable |
| Pipe Color | Silver |
| Drive | 2WD |
| Drive | 4WD |
| 9885 | 10.00 |
| 11906 | No |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 1994 | Chevrolet | Blazer | Base | |
| 1992 | Chevrolet | Blazer | Cheyenne | |
| 1993 | Chevrolet | Blazer | Cheyenne | |
| 1992 | Chevrolet | Blazer | Silverado | |
| 1993 | Chevrolet | Blazer | Silverado | |
| 1994 | Chevrolet | Blazer | Silverado | |
| 1994 | Chevrolet | Blazer | Silverado Sport | |
| 1992 | GMC | Yukon | Base | |
| 1993 | GMC | Yukon | Base | |
| 1994 | GMC | Yukon | Base | |
| 1995 | GMC | Yukon | Base | |
| 1993 | GMC | Yukon | GT | |
| 1992 | GMC | Yukon | SLE | |
| 1993 | GMC | Yukon | SLE | |
| 1994 | GMC | Yukon | SLE | |
| 1995 | GMC | Yukon | SLE | |
| 1995 | GMC | Yukon | SLT | |
| 1992,1994 | GMC | Yukon | Sport |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.