Centering Plate and Anti-Coning Rings for 17 Inch DIY Beadlocks Motobilt - MB4112
Secure Checkout
Shop by Categories
Secure Checkout
DIY Bead Locks have always been an issue to center the tire when installing to help balance the tire. The Motobilt Centering Plate Kit for 17 inch DIY Bead Locks solves this problem. In addition, it serves as an Anti-Coning Ring to help prevent the outer ring from coning inward when tightening the ring down to clamp the tire.
These specially designed 3/8 inch thick steel plates make the process of centering any of our 17 inch DIY Bead Lock Ring Kits an easy process.
Installing the centering rings is an easy process. The parts key together during the first step of bolting them in place. The parts sit on the outside face of the inner bead ring. Bolt them in and work them until they make as perfect of a circle as possible. At this point, you are not bolting the outer ring on, only the centering plates.
Once you have them in place, a 3/4 inch long weld on each end of each plate will hold them in place. You do not have to fully weld them. The centering ring does not seal air in the wheel and tire. A side note here at the shop: we have done this process with the tire in place to ensure we are getting it as centered and as round as possible.
Once you have all of the welds in place, you can remove the bolts to install the outer clamping ring on your DIY bead lock kit.
This kit includes six (6) plates, which is enough to complete one (1) bead lock wheel.
Compatible with:
Parts are shipped as raw, unfinished steel. Welding required.
Specifications:
| Country of Origin | USA |
| Sold As | Set |
| Availability | Available |
| Hardware Included | Yes |
| Universal | No |
| About |
Motobilt is a manufacturing company located in Ozark Alabama dedicated to producing quality American Made aftermarket parts for Jeeps and other off-road vehicles. Motobilt was founded in 2012 by, an off-road industry pioneer, Dan DuBose. We currently employ around 60 professionals in our 85,000 sq ft plant. We produce our Motobilt product line and manufacture for many other companies in the USA. |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.