Full Width Dana 44 Swap Kit
Secure Checkout
Shop by Categories
Secure Checkout
Jeep TJ/XJ Full Width Front 44 Swap Kit/Truss
Our machined coil correction plates and coil retainer's are included! These prevent spring bowing (usually associated with the coil sitting on a flat surface) and retain the coil even under full extension of your suspension travel. These are weld on so you're free to position them front to back as you please to best suite your configuration. The retainer plate is fastened through the coil correction plate - which comes pre tapped to 1/2"-13 - hardware included!
Wheel spacers or different wheels may be required to maintain turning radius without having tires rub on the lower control arms depending on your tire size/configuration.
Upper control arm mounts are placed a bit higher (due to the geometry of the larger Dana 44 center section vs the Dana 30 center section) in relationship to the axle tube. Adjustable upper control arms are highly recommended. This truss will work with most front "Y-link"/radius arms that have the upper control arm affixed to the lower control arm.
Welding should be done by a competent welder/shop. Some grinding may be required for best fit. Instructions for setting caster properly etc is e-mailed at the time of your order.
Not sure how to choose a front housing or need help identifying one? Check out The Ranger Station!
Re-tubing of axle housing will likely be required for 1978-1979 Ford housings that have "cast wedges"; we highly recommend finding another axle housing if you already have a 78-79 housing (does *not* apply to housings from leaf-sprung trucks)
*Axle swaps may require use of wheel adapters or new wheels depending on the desired lug pattern for your vehicle*
*Front Truss+Accessories only; you will need to source an axle housing of your own* Upper control arm bushings will be required as well and we carry them here.
*PRODUCT SHIPS BARE METAL & UNWELDED*
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.