Inner C Gusset Kit (JL/JT - M210 Dana 44)
Secure Checkout
Shop by Categories
Secure Checkout
Strengthen one of the most common failure points in the Jeep Wrangler JL and Jeep Gladiator JT M210 Dana 44 front axle with our Inner C Weld-On Gusset Kit. Built from heavy-duty .250-inch steel plate, this kit reinforces the factory inner C to reduce flex and prevent deformation under hard off-road use.
Larger tires, aggressive trail driving, and increased steering loads can place significant stress on the M210 front axle housing, causing the inner C to bend or lose alignment. This gusset kit adds structural reinforcement exactly where the axle needs it most, helping maintain proper suspension geometry and long-term axle reliability.
Designed specifically for the M210 Dana 44, this kit is an essential upgrade for rock crawling, overlanding, trail riding, and high-clearance Jeep builds.
Our gusset kit is engineered for simple and accurate installation. Each gusset keys off the existing threaded holes in the factory inner C, allowing the gusset to index into position before welding.
This design:
Helps ensure proper alignment during installation
Speeds up the welding process
Adds additional structural reinforcement to the inner C once installed
With minimal prep and proper welding, this kit provides a permanent strength upgrade to your front axle assembly.
Designed for Jeep Wrangler JL (2018+)
Compatible with Jeep Gladiator JT (2020+)
Fits M210 Dana 44 front axles
Reinforces the factory inner C weak point
Precision cut from .250" thick steel plate
Weld-on gusset kit for permanent reinforcement
Keys off factory threaded hole for easier installation and alignment
Adds additional structural strength to prevent bending
Ideal for off-road, rock crawling, and heavy trail use
This gusset kit is designed for:
2018+ Jeep Wrangler JL
2020+ Jeep Gladiator JT
Vehicles equipped with the M210 Dana 44 front axle
If you are running larger tires, lockers, heavy steering upgrades, or aggressive trail setups, reinforcing the inner C is strongly recommended.
Not always. Many installers weld the gussets with the axle still in the vehicle, though proper prep and protection of nearby components is recommended.
Yes. This is a weld-on reinforcement kit designed for permanent installation.
No. These gussets are specifically designed for the M210 Dana 44 front axle found in JL and JT models.
The design uses the factory threaded hole in the inner C as an indexing point, helping ensure the gusset is positioned correctly before welding while also adding additional reinforcement.
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.