JKU Rocker Armor
Secure Checkout
Shop by Categories
Secure Checkout
JKU Rocker Armor
This rocker armor is laser cut and CNC formed from 1/8" 5052-H32 Aluminum alloy, and is intended as a secondary layer of protection behind true frame mount rock sliders like our Rimrocker Sliders. Our JKU rocker armor can also be used to clean up the appearance of your JK if you've sustained body damage prior to upgrading your sliders!
Light-weight 1/8" 5052 Aluminum Construction
CAD Designed from precise 3D scans and precision laser cut for a great fit!
Mounting kits included (configuration specific)
Bolt Patterns match Next Venture Rear High Line Fender Flares for compatibility and additional tie in points to the body for the flares
Made In Colorado, USA

Above: View of Next Venture Rimrocker Series Rockslider (sold separately) and Rocker Armor. Drilling and installation of hardware behind the rock slider is difficult due to the full coverage nature of the slider design and is nearly impossible. Either the "stick on" or "9 bolt" mounted rocker guards are ideal for installation with our Rimrocker Sliders for this reason.
The "9 bolt" design is ideally installed with 3M VHB tape along the top edges where the rocker armor meets the doorsill. This gives you an excellent combination of fastening and adhesion and allows for minimal drilling into the body.
Our JKU Rocker Armor is compatible with nearly all aftermarket frame mounted rock sliders with the below three configuration options. You will need to choose one of the first two options if your JK is already equipped with our Rimrocker Series Rock Sliders.
0 Holes - "Stick On"/ Drill To Match (Universal Compatibility)
Comes pre-cut with NO mounting holes
Ideal if your body is completely straight and you don't want to put additional holes in it!
Can be installed with included 3M VHB Double Sided Mounting Adhesive for zero drilling installation
Can be drilled out to match existing rivet nuts already in your JK body tub - a commonly requested feature from customers that are removing previously installed body mounted rock sliders to swap out for frame mounted rock sliders
9 Bolt (For Bolt On Install With Next Venture Rimrocker Sliders)
Due to the boatside shape and full coverage nature of our Rimrocker Rock Sliders, it's nearly impossible to drill all of the holes you might find in most typical Jeep Rocker Armor installations
This mounting configuration is pre-cut only for the hole locations that are 100% accessible with existing Rimrocker Sliders already installed
9 Holes are precut, including those compatible with our rear high line fenders
Mounting Hardware and 3M VHB Double Side Mounting Adhesive is required and included with this configuration
20 Bolt (Full Bolt On Install - Not For Use With Rimrocker Sliders)
20 Holes are pre-cut along both flanges
Mounting is done entirely with included rivet nuts and 1/4-20 bolts
Note: This configuration is NOT compatible with our Rimrocker Series Rock Sliders - as their coverage will prevent installation of nearly half of the mounting locations. Please choose either the "stick on" or "9 bolt" configurations instead if you have our Rimrocker Sliders
Rivet nut tool is required for installation unless using "stick on" configuration without fasteners
We do recommend sealing/coating any holes that are drilled for rivet nuts to prevent corrosion of exposed metal
Paint or Coating is required - these ship bare metal! We recommend a metal protectant such as Sharkhide (a marine grade clear coat) to be used if you would like a natural aluminum finish appearance with minimal maintenance.
Set ships as a pair of left and right.
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.