JLU Diesel Aluminum Belly Skid Plates
Secure Checkout
Shop by Categories
Secure Checkout
Now available for the JT Gladiator EcoDiesel here! Looking for our JLU gas belly skids? Click here.
Want to be ready for any trail, any time? Skid plates provide advanced protection for your JL's most critical components -- your engine, transmission, transfer case, DEF tank, and fuel tank -- while you're tackling tough terrain, technical obstacles, and of course for the ride home.
We build these skids out of 1/4" thick 5052 Aluminum because of its superior formability and strength -- compared to many other alloys. The design and shape of the skids largely determine how rigid they will stay over time. We've designed these belly skids to tuck bolt heads up and out of the way, where possible (as can be seen on the rear crossmember and fuel tank skids).
Removal of the factory fuel tank skid is required for install, netting you a 1/2" gain in ground clearance; in addition, you will lose the weight of the factory steel gas tank skid.
A removable access panel is featured below the fuel filter/water separator housing so maintenance doesn't require dropping the entire fuel tank skid plate.
We also designed these pieces to be easily modified for use with popular aftermarket suspension kits (such as the Rock Krawler and other similar Long Arm Suspension systems), larger axles, and multiple engine choices.
The skid system weighs approximately 117 lbs, however, you will be removing about 86 lbs of the factory skids and cross members, replaced by this setup -- for a total weight gain of just over 30 lbs. If you opt for UHMW the JLU 3.0 EcoDiesel UHMW kits weigh in at 29 lbs.
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.