{"product_id":"jt-rock-sliders-trailbreaker-series-frame-mounted","title":"JT Rock Sliders - Trailbreaker Series (Frame Mounted)","description":"\u003ch1\u003e\u003cstrong\u003eJeep Gladiator JT Rock Sliders – Frame Mounted – Trailbreaker Series\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eWhen a Jeep club or 4x4 organization works with the BLM or Forest Service to open a new trail, the first run is usually the toughest. That’s the idea behind the Trailbreaker Series—built for the kind of day where you don’t know what you’re going to hit, you just know it’ll be rough.\u003c\/p\u003e\n\u003cp\u003eIf I could only take one set of rock sliders to a true trail-breaking event on my JT, this is what I’d pick: a frame-mounted design that can take repeated hits, slide cleanly, and protect the areas most sliders leave exposed—including a real boatside transition when you choose the skin packages.\u003c\/p\u003e\n\u003cp\u003eThese Jeep Gladiator JT sliders are designed for serious rock use—not “step-only” duty—so you can pivot off obstacles, drag the belly without worry, and keep the lower body protected trail after trail.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"Animation for Bare Bones Slider Getting 7075 Add On and Then UHMW Add On\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0441\/9443\/1141\/files\/bare_bones_2_1024x1024.gif?v=1769299044\"\u003e\u003c\/div\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat’s New vs the Rimrocker Series (Previous Generation)\u003c\/h2\u003e\n\u003cp\u003eThe Trailbreaker Series replaces our prior Rimrocker Series sliders with improvements that matter on hard trails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMajor weight savings vs welded steel faceplate designs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMore ground clearance (bottom tube raised ~1.5\"+ compared to Rimrocker generation)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTrue boatside protection options that fill the gap between the slider and frame rail for a smoother underbody line\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo bottom-tube aluminum slug required: strength is built into the tube design with thicker DOM where impacts occur\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBolt-on capable frame mounting (with drilling) while still supporting weld-on installation for extreme users\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eConstruction \u0026amp; Materials\u003c\/h2\u003e\n\u003ch3\u003eCore Slider Structure (Steel)\u003c\/h3\u003e\n\u003cp\u003eTrailbreaker sliders use a true dual-tube, frame-mounted structure built for repeated impacts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2\" Diameter DOM  structural steel tubing\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eTop tube: .188\" wall DOM for strong side protection with smart weight control\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBottom tube: .250\" wall DOM where the slider takes the hits—maximum strength in the impact zone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrame Mounting System (Steel Brackets)\u003c\/h3\u003e\n\u003cp\u003eLaser-cut, CNC-formed steel brackets using a strength\/weight optimized blend of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\/16\" steel where formed strength and reduced bulk make sense\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\/4\" steel where maximum rigidity and load distribution into the frame are required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eSlider Configuration Options\u003c\/h2\u003e\n\u003cp\u003eChoose your slider configuration based on how you wheel today—and how you may want to upgrade later.\u003c\/p\u003e\n\u003ch3\u003eOption 1: \u003cstrong\u003eBare Bones (No Skins)\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eA premium frame-mounted slider system with no aluminum skins, no UHMW, and no pre-installed threaded rivet nuts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eBuilt to take impacts as a true frame-mounted rock slider\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAllows you to add skins later if you want the boatside + outer armor surfaces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBest for customers who want the core structure now and plan to upgrade down the road\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: If you select Bare Bones, skins can be added later with our conversion kits.\u003c\/p\u003e\n\u003ch3\u003eOption 2: \u003cstrong\u003e7075 Boatside (7075 Skins)\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eAdds our full 7075-T6 aluminum skin package, including the boatside panel—and includes the threaded rivet nuts required for installation.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e7075-T6 faceplate panel between the top and bottom tubes for a smooth outer armor surface\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e7075-T6 boatside panel between the bottom tube and the frame rail to fill the gap and create a smooth, seamless transition under the vehicle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThreaded rivet nuts included (required for mounting the 7075 panels)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eStrong, smooth outer surface that slides better than typical step-only slider designs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGap coverage reduces snag points and protects areas many sliders leave exposed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRust-free armor surfaces (even if coating is scratched)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLong arm note:\u003c\/strong\u003e Boatside panels are \u003cstrong\u003epre-cut to clear most long arm kits\u003c\/strong\u003e in the most common interference area.\u003c\/p\u003e\n\u003ch3\u003eOption 3: \u003cstrong\u003eGlide Boatside (7075 + UHMW)\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eOur maximum-performance configuration for real rock use. Includes everything from the 7075 Boatside, plus UHMW wear surfaces in the high-contact zones.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e7075-T6 faceplate + boatside panels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThreaded rivet nuts included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUHMW wear surfaces designed to take the abuse and slide cleanly on rock\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhy UHMW matters:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLow-friction glide helps the Jeep transition over obstacles instead of grabbing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImpact absorbing and highly resistant to gouging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned as a replaceable wear layer for customers who use sliders hard\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLong arm note:\u003c\/strong\u003e Boatside panels are \u003cstrong\u003epre-cut to clear most long arm kits\u003c\/strong\u003e in the most common interference area.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eClearance \u0026amp; Boatside Benefits\u003c\/h2\u003e\n\u003cp\u003eThe boatside design is functional trail geometry:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCovers the gap between slider and frame rail, reducing snag points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCreates a smoother “ramp” that helps the Jeep transition up and over obstacles instead of hanging up on edges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdds protection to areas many sliders leave exposed, including common body mount \/ frame bracket regions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHOW FAR DOES THE SLIDER HANG DOWN FROM THE BODY?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" below the JT pinch seam (as measured from the lowest point of the tube)\u003c\/li\u003e\n\u003cli\u003e3 1\/8\" above the JT frame rail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0441\/9443\/1141\/files\/Screenshot_2026-03-09_104727.png?v=1773075745\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation Options\u003c\/h2\u003e\n\u003cp\u003eThese are frame-mounted sliders intended to take vehicle weight on rocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eBolt-on capable with drilling (uses factory holes plus recommended added holes)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWeld-on recommended for extreme use for maximum rigidity and long-term durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePinch seam relief required to tuck the slider high and tight\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eControlled notch\/trim method designed to maintain body sealing (no cutting that would create leaks)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSuspension \/ Long Arm Fitment Notes\u003c\/h2\u003e\n\u003cp\u003eMany long arm suspension systems use rear lower control arm frame mounts that can interfere with a full-coverage boatside panel.\u003c\/p\u003e\n\u003cp\u003eTo reduce install hassle and avoid customer trimming, our \u003cstrong\u003eboatside panels are pre-cut to clear most long arm kits\u003c\/strong\u003e in the most common interference area.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIf you’re running a long arm kit: this pre-cut design is intended to bolt up cleanly on most popular systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIf you’re running mid arms (or staying stock) and want a fully closed boatside line: a \u003cstrong\u003ebolt-on Close-Out Kit is in development\u003c\/strong\u003e to fill that relief area (coming soon).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: aftermarket variations exist. Minor hand fitting may still be required depending on your exact suspension and frame mount geometry.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWeights \u0026amp; Shipping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eInstalled weight per side, including hardware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare Bones: ~106 lbs\u003c\/li\u003e\n\u003cli\u003e7075 Boatside: ~123 lbs\u003c\/li\u003e\n\u003cli\u003eGlide Boatside (7075 + UHMW): ~132 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eAdditional Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eVehicles vary—minor hand fitting may be required due to factory tolerances and aftermarket combinations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLead times are estimates and may shift due to material\/labor availability and order volume.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned and fabricated in the USA: laser-cut, CNC-formed, and hand-welded with pride by Next Venture Motorsports in Grand Junction, CO.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Next Venture Motorsports LLC","offers":[{"title":"Glide Boatside","offer_id":67967497437494,"sku":"NV-JT-00125+7A+UHMW","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"7075 Boatside","offer_id":67967497470262,"sku":"NV-JT-00125+7A","price":2099.99,"currency_code":"USD","in_stock":true},{"title":"Bare Bones","offer_id":67967497503030,"sku":"NV-JT-00125","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/2726\/0726\/files\/CFC161A7-8249-47E3-92D7-D6E661C42698_2ffb3620-d84c-408e-9974-a0b12afdf596.jpg?v=1794277943","url":"https:\/\/offroadtradingco.com\/products\/jt-rock-sliders-trailbreaker-series-frame-mounted","provider":"Offroad Trading Company®","version":"1.0","type":"link"}