Marine and Powersports Headunit 2.75" LCD screen , 1 Zone, 4 volts Output, BT, RDS 4 X 40 Watts
Secure Checkout
Shop by Categories
Secure Checkout
DS18’s HYDRO MRX1 is the ultimate all-in-one marine head unit for power, precision, and durability.
This beast handles whatever you throw at it with its IPX6 water resistance, UV protection, salt spray shield, and conformal coating. Plus, it comes with a silicone cover for extra protection when not in use.
With V4.2 Bluetooth pairing capabilities, you can easily connect your phone or any Bluetooth-enabled device to play music directly through the MRX1. Experience precise sound control with adjustable bass, treble, balance, fade, EQ, loudness, and Subwoofer crossover settings. Choose from preset EQ options like FLAT, POP, ROCK, CLASSICAL, or turn off the EQ altogether for a customized sound experience. Adjusting settings has never been easier thanks to CT sync, which allows you to fine-tune time settings using over-the-air radio frequencies. Not only does the MRX1 deliver superior sound quality and functionality, but it also features a wideband AM/FM receiver for enjoying all your favorite radio stations.
The MRX1 boasts three outputs for easy integration into fully applied systems, including front, rear, and sub high-quality outputs. The USB port not only enables music transfer but also charges your device at a rate of 2a. The MRX1’s 4 ohm load, offers 4x15W RMS, while a 2 ohm load offers 4x20W RMS. Prepare to be blown away by the MRX1's unmatched sound output. With 4v preamp outputs, you can expect exceptional audio quality with the voltage to push it.
The MRX1 is the ultimate companion for those seeking exceptional sound.



Ecl290m4t5000001s652xvgpurE
| AM/FM Antenna | Yes |
| Audio Input(L+R) | Yes |
| USB For Music & Charging | Yes, Charging 2A |
| Wired Remote Input | Yes |
| Outputs- Rear Chassis | |
| Speaker Power Plug | Yes, Molex Plug 12pin Water Resistant |
| Audio Output Front (L+R) | Yes |
| Audio Output Rear (L+R) | Yes |
| Subwoofer Output RCA | Yes |
| Sub out low pass filter | Yes, 80/120/160Hz, Gain 0-12 |
| Media Playback | |
| USB (64G Memory) | Yes |
| Bluetooth v4.2 | Yes |
| BT Streaming ID3 Tag info | Yes |
| Other Features | |
| Operating Voltage | 12V |
| Preamp Output | 4V RMS Differential |
| LCD Display type | Negative VA |
| Backlight | Yes |
| IR Remote | No |
| Low Battery Beep | Yes |
| EEPROM | Yes |
| Conformal Coating | Yes |
| IPX Rating | IPX 6 |
| UV Resistance | Yes |
| Salt Spray Resistance | Yes |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.