Polaris Slingshot Rear Subwoofer Enclosure Loaded
Secure Checkout
Shop by Categories
Secure Checkout
Feel the bass in your Polaris Slingshot with DS18’s SLG-RSUB10LD: a subwoofer enclosure installed in the Rear Storage Compartment behind Polaris Slingshot seats!
Adding this durable 10” Subwoofer Enclosure into your Polaris Slingshot’s sound system will instantly increase the quality and feel of the bass response it reproduces.
Fitted perfectly for rear storage compartments in all Polaris Slingshot models, when combined with all enclosures in our SLG series, the SLG-RSUB10LD reinforces an impenetrable soundstage designed to cut through the noise of the open road!
The high powered NXL-10SUB was built to bring the bass on your Slingshot to life. Designed with an IP65 marine-grade frame, this 10-inch subwoofer is guaranteed to deliver hard-hitting bass that will stand up to the elements. Plus, its UV compliant cone and butyl rubber surround make it stable enough to withstand the open air design of the Slingshot. Not only does the NXL-10SUB bring the BOOM with its 300 watts RMS and 600 watts max power handling and 4-Ohm impedance, it also features integrated RGB lights that can be connected to any RGB 4-wire circuit for a customizable ambiance that will match your mood or color scheme.
(LED-BTC recommended)
Install this subwoofer enclosure into your Polaris Slingshot’s sound system seamlessly through use of the factory bolts and mounting location.
Upgrade your sound system today with DS18’s SLG-RSUB10LD and experience the ultimate in subwoofer performance.
Highlights
Great For





| GENERAL | |
| Speaker Size | 10" / 254mm |
| Total Impedance | 4 Ohms |
| Total RMS Power Handling | 300W |
| Total MAX Power Handling | 600W |
| Sensitivity (1w/1m) | 89dB |
| Frequency Response | 35-250Hz |
| Recommended Lo Pass Crossover | 100Hz |
| SPEAKER SPECIFICATIONS | |
| Voice Coil Diameter | 2" / 50.8mm |
| Voice Coil Former Material | Glass fiber |
| Winding Material | CCAW |
| Cone Material | Injection Molded Polypropylene + UV Compliant |
| Dust Cap Material | PPI |
| Surround Material | Butyl (Rubber) |
| Basket Material | High Temp Injection Molded Composite (ASA) with UV Protection coating |
| Magnet Material | Ferrite |
| Magnet Weight | 72oz |
| BOX SPECIFICATIONS | |
| Internal Volume | 0.75 ft3 / 21L |
| Load Configuration | Single |
| Box Type | Ported / Vented |
| Port Tuned (Fb) | 40Hz |
| Box Material | Polyethylene (PE) |
| Finish Material | Black |
| -3Db Dropping Point (F3) | 45Hz |
| UV Protection | Yes |
| Waterproof Rating | IP65 |
| MEASUREMENT | |
| Overall Height | 18.78" / 477mm |
| Overall Width | 15.25" / 388mm |
| Overall Depth | 14.31" / 363.3mm |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.