PRO 10" Neodymium Water Resistant Woofer 400 Watts Rms 4-Ohm SVC
Secure Checkout
Shop by Categories
Secure Checkout
DS18 is proud to present you with a woofer long awaited by all bikers and powersports enthusiast alike! The DS18 PRO-W10.4SNEO is a full size water resistant loudspeaker woofer made to withstand harsh elements all while not sacrificing any build quality that normally comes with marine speakers. This hybrid both comes with a standard woofer basket, coil, and Neodymium motor structure all while the cone of the woofer is water tight and made so it can take any water without risking corrosion and deformation that water naturally causes.
The basket has also been coated to withstand corrosion. The cone is made of durable light weight plastic with the rubber surround to make sure things stay tight. This combo allows zero water to penetrate into the inner workings of the woofer to ensure long life and loudness. This woofer is offered in single 2 ohms and 4 ohms configurations and handle 400w RMS and 800w Peak power and works very well with both sealed and ported boxes.




| Nominal Diameter | 10" |
| Nominal Impedance | 4 Ohms SVC |
| Maximum Power Handing | 800 watts |
| RMS Power Handing | 400 watts |
| Sensitivity (1w/1m) | 91dB |
| Frequency Response | 40Hz - 5KHz |
| Recommended Lo Pass Crossover | 180Hz |
| Motor | |
| Voice Coil Diameter | 2.5" |
| Voice Coil Former Material | 2.12L |
| Winding Material | SV |
| Cone Material | Water resistant paper |
| Dust Cap Material | Water resistant paper |
| Surround Material | Rubber |
| Basket Material | Steel |
| Magnet Material | Neodymium |
| Magnet Weight | 8.8 oz |
| Displacement Volume | 1.79L |
| Measurements | |
| Overall Diameter | 10.39" |
| Overall Depth | 4.80" |
| Front Mount Baffle Cutout | 9.09" |
| Mounting Depth | 4.25" |
| Motor Diameter | 3.42" |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.