Rusty's Adjustable Front Track Bar - 2.5-5" Lift (TJ, XJ, ZJ)
Secure Checkout
Shop by Categories
Secure Checkout
This is for 2.75"-5" lift applications. Use RC-TB111-UV for lifts under 2.5" or below.
The Track Bar locates the axle side-to-side in relation to the vehicle's frame or unibody. A suspension lift changes the operating angle of the track bar and makes the effective length of the track bar shorter, which shifts the axle off-center. This is very noticeable with lifts over 2 inches. If your vehicle is already lifted, view it from the front and see if the axles are centered underneath the body; more than likely the front axle is shifted over to the driver side, while the rear axle is shifted toward the passenger side.
Most manufacturers include some sort of bracket to lower the track bar mounting point on the frame or raise the track bar's mounting point on the axle. The problem with this method is that the vehicle may get too much or not enough track bar correction using these types of brackets. The additional stress created by the extra leverage of the relocation brackets can also lead to cracks and ultimately failure of the track bar mounts. These brackets also seem to never stay tight and can force the track bar's operating angle to be out of phase with the steering linkage, which creates all kinds of handling quirks.
Rusty's Adjustable Track Bar eliminates these problems. The track bar uses the original locations and uses a replaceable tie-rod end with enough threaded length to accommodate a 2" to 5" lift. Rusty's Track Bars are constructed of 1.25" x .188" wall DOM tubing. They are black powder coated and come with heavy-duty polyurethane bushings at the axle end. They have 2.5" of adjustability.
We've used a few different tie-rod ends in our track bars:
OEM part # 52005739 - - MOOG part # ES3096L
OEM part # 52005740 - - MOOG part # ES3095R
OEM part # 52000599 - - MOOG part # ES2223R
OEM part # J8136600 - - MOOG part # ES140R
Part # R2327-10 - - Axle End Replacement Bushing
Key Features:
• 1.25" x .188" wall DOM tubing
• Aligns body with chassis
• Frame mount eliminates binding at full flex
• Super Strong construction
• Black Powder coated for durability
• Rusty's Limited Lifetime Warranty
| |
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.