Toyota LC250 Front Bumper (2024+)
Secure Checkout
Shop by Categories
Secure Checkout
Add real recovery capability to your 2024+ Toyota Land Cruiser 250 while keeping the clean factory front end. The Featherweight Series front winch bumper replaces the OEM center section with a purpose-built winch mount, giving you room for a full-size winch and two 1"-thick steel recovery points without converting the truck to a heavy full-steel bumper.
It is built light where it can be and strong where it has to be: aluminum outer construction for reduced weight, with a welded steel winch tray and steel recovery points where the pulling loads actually happen.
The Featherweight Series uses steel in the high-load areas and aluminum everywhere else. The winch tray and recovery points are built from welded steel to handle recovery loads, while the aluminum shell keeps unnecessary weight off the front of the truck.
You get strength exactly where you pull from, without hanging a heavy full-steel bumper off the nose of your LC250.
Recover with confidence using two 1"-thick steel recovery points built for hard trail use. Each recovery point is designed with clearance for soft shackles or D-rings, giving you a strong, dependable pull point when the trail stops being polite.
This is a winch bumper center section, not a full bumper replacement. The factory bumper remains in place outside the winch area, so your Land Cruiser keeps its OEM lines, clean front-end styling, and near-stock appearance.
Designed to mount most 9,000-12,000 lb winches, giving your LC250 the recovery capability it should have had from the start.
Add a replaceable UHMW skid layer for additional protection against rocks, debris, and trail impacts. UHMW helps the bumper slide over obstacles instead of digging in or gouging the aluminum.
The optional lower skid tie-in connects the front bumper area into your underbody armor, creating a more continuous protection path from the front of the vehicle into the skid system.
Designed and fabricated in Grand Junction, Colorado. Welded in-house using aluminum and steel hybrid construction.
Fitment: 2024+ Toyota Land Cruiser 250 Series
Please read the policy below to familiarize yourself with how we operate.
Please verify the part number that you are ordering before you place your order. If a part is ordered incorrectly by the customer and then returned, the customer will be responsible for all shipping charges and will be subject to a 20% restocking fee. We cannot be held responsible for manufacturer misinformation. If we messed up the order, then of course, we will take care of it. An RGA number must be requested within 7 days of receipt of the product by the customer. Returns must be received within 30 days of the initial purchase. We do not accept returns after 30 days. If an RGA is requested after 7 days of receiving the product then only an in-store credit will be issued. We do not refund shipping costs.
At Offroad Trading Company, we are committed to providing high-quality products and ensuring customer satisfaction. It does not matter if it is a Jeep, Truck, Bronco or any other 4x4 vehicle, our extensive experience and deep understanding of the off-road industry enable us to offer products that meet the highest standards of quality and performance. Choosing Offroad Trading Company means choosing a partner who is as passionate about off-roading as you are.